4-Piece Home Sensor Kit 2.0

Detail

Meet our new version of the beloved essential sensor kit that now has extended compatibility to a wider ecosystem, embracing more convenience powered by Matter and Apple HomeKit. The kit enhances smart home security by detecting a variety of activities, using an integrated system of a PIR motion sensor, an open/close sensor, and a smart button, which seamlessly operate, interlink and send real-time alerts via the bridging home gateway. With its blend of straightforward features, intuitive controls and elegant design, this kit provides peace of mind and unmatched simplicity in one convenient package.

To enjoy the Internert-connected features of the sensor kit, the T1C, T2C and T3C sensors need to be successfully connected to the A3-R200, and the A3-R200 needs to be connected to your home Wi-Fi or wired network.
The included A3-R200 Home Gateway is compatible with Apple HomeKit and Matter standard for inter-system communication. The compatibility with specific products of other brands is subject to actual conditions. Please refer to the EZVIZ App device page for information.
This sensor kit can only integrate with wired EZVIZ cameras launched with version 5.3.4 or later firmware. Please contact the support team to confirm any other camera’s compatibility.
The Home Gateway A3-R200 is not battery-powered and needs to be connected to a power outlet and placed on a flat surface. The sensors and the button are battery-powered with included cell batteries and can be installed easily with the included adhesives.
To enable this function, the sensors should first be connected to the working A3-R200 gateway, which also needs to be connected to a stable home network via Wi-Fi or a wired cable. Once the automation task is successfully created through the EZVIZ App, users can arm or disarm the connected sensors. Please refer to the instructions on the related app page to use the function.
The A3-R200 can connect up to 32 battery-powered EZVIZ devices, or up to 64 devices if wired EZVIZ devices are added. More compatible products will be launched in the near future. Please verify product compatibility before purchasing.
The button can only be used at home with your EZVIZ Home Gateway to ensure steady connectivity. Once it’s disconnected from the Gateway, it will no longer work as an operating controller.
The A3-R200 supports following cameras to automatically rotate their lenses to follow activities using the smart tracking feature upon sensor detection: H6c, C6N, CP1, TY1, TY2, C8W and other PT cameras that support EZVIZ Connect. Please contact our after-sales team for more information on the feature availability on specific camera models.

4-Piece Home Sensor Kit 2.0

Integrate, automate and secure — all in one kit

Specifications

Specifications
Model	CS-A3-R200-WBG
General
Interface	Type-C
Power Supply	Uses Type-C USB Cord,DC 5V / 1A
Power Consumption	Max.3W
Maximum Incoming Devices Quantity	Up to 64 ZigBee devices (including up to 32 battery-powered devices)
Wired Network	1*RJ45 (10M/100M Adaptive）
Speaker	0.8W 8Ω
Button	Main Button, Reset Button (Pinhole)
Operation Conditions	10 °C to 55 °C ( 14 °F to 131 °F ), humidity 95% or less (non-condensing)
Dimensions	φ 80.0 × 33.0 mm (φ 3.15 × 1.30 inch)
Package Size	102.0 x 107.0 x 91.0 mm (4.0 × 4.2 x 3.6 inch)
Net Weight	90 g (3.2 oz)
Network
Ecosystem	HomeKit/Matter
Communication Methods	RJ45 interface network cabl Wi-Fi 2.4 GHz ZigBee 3.0 Bluetooth 5.3
Communication Distance	Wi-Fi (2.4 GHz) ＜ 200 m ZigBee 3.0 ＜ 200 m (Tested in open environment)
Antenna	Built-in
Wi-Fi Standard & Frequency Range	IEEE 802.11b/g/n/ax
Security	WPA-PSK/WPA2-PSK
Channel Bandwidth	20 MHZ
Wi-Fi Pairing	AP Pairing
Protocol & Interface Protocol	EZVIZ Cloud Proprietary Protocol
Specifications
Model	CS-T1C-A0-BG
Sensor Type
Sensor Type	Passive infrared
Specifications
Viewing Angle	90° Horizontal, 90° Vertical
Maximum Detection Distance	7m
Warm-up Time	2~3min
Function
Low Battery Reminder	Supports
Tamper Alarm	Supports
Pet-proof	Supports. (Vertical wall-mounted, wearing the shielding cover, installed at a height 50cm higher than the pet.)
Installation Methods	Wall-mounted, Top-mounted, Placed, Double-sided adhesive, Magnetic installation
Wall height	1.8~2.5m recommended for wall-mounted
Battery
Battery Type	CR2450
Battery Life	1 year of battery life in intelligent mode, 2 years battery life in energy-saving mode
Network
Protocol	ZigBee 3.0
Wireless Frequency	2.4 GHz
Communication Distance	> 250m (open environment)
General
Operation Conditions	-10 °C to 55 °C (14 °F to 131 °F), humidity 95% or less (non-condensing)
Storage Temperature	-20°C ~ 60°C( -4°F to 140°F )
Operating Voltage	DC 3V
Working Current	Static State: 10μA; Up to 25mA
Dimensions (mm / inch)	Main body: φ 43.5 x 32 mm (φ 1.7 x 1.3 inch) Magnet: φ 29 x 9.5 mm(φ 1.1 x 0.4 inch)
Suttle Weight (g / lb)	92 g (3.2 oz)
Specifications
Model	CS-T2C-A0-BG
Sensor Type
Sensor Type	Reed Switch
Specifications
Trigger Distance	Wooden door: 25mm±5mm; Iron door: 15mm±5mm
Warm-up Time	2~3min
Function
Low Battery Reminder	Supports
Tamper Alarm	Supports
Installation Method	Double-sided adhesive paste
Battery
Battery Type	CR1632*2
Battery Life	2 years (calculated by opening and closing 30 times a day)
Network
Protocol	ZigBee 3.0
Wireless Frequency	2.4 GHz
Communication Distance	> 250m (open environment)
General
Operation Conditions	-10 °C to 55 °C (14 °F to 131 °F), humidity 95% or less (non-condensing)
Storage Temperature	-20°C ~ 60°C( -4°F to 140°F )
Operating Voltage	DC 3V
Working Current	Static State≤10μA, Up to 25mA
Dimensions (mm / inch)	Main body: 53.5 × 22.5 × 13.5 mm (2.1 × 0.9 × 0.5 inch) Magnet: 32.0 × 10.5 × 13.5 mm (1.2 × 0.4 × 0.5 inch)
Suttle Weight (g / lb)	21 g (0.4 oz)
Specifications
Model	CS-T3C-A0-BG
Sensor Type
Sensor Type	Switch Button
Tap Time
Single Click	< 2 s
Double Click	Interval time < 0.5 s
Long Press	≥ 2 s
Function
Low Battery Reminder	Supports
Tamper Alarm	Supports
Installation Method	Double-sided adhesive paste
Modes	Arming and Disarming Mode, Emergency Call Mode
Battery
Battery Type	CR2032
Battery Life	1 year (calculated by 15 clicks a day)
Network
Protocol	ZigBee 3.0
Wireless Frequency	2.4 GHz
Communication Distance	> 250m (open environment)
General
Operation Conditions	-10 °C to 55 °C (14 °F to 131 °F), humidity 95% or less (non-condensing)
Storage Temperature	-20°C ~ 60°C( -4°F to 140°F )
Operating Voltage	DC 3V
Working Current	Static State≤10μA, Up to 25mA
Dimensions (mm / inch)	Φ 40.6 x 12.3 mm (φ 1.6 x 0.5 inch)
Suttle Weight (g / lb)	13 g (0.4 oz)
In the box
In the box	- A3-R200 Home Gateway
	- Power Adapter for A3-R200
	- USB Cable for A3-R200
	- T1C PIR Sensor
	- Pet Shield for T1C
	- T2C Open/Close Sensor
	- T3C Smart Button
	- Doubled-sided Tape Strips (3)
	- Regulatory Information
	- Quick Start Guide
Certifications
Certifications	CE / UL / WEEE / REACH / RoHS